DIN / EN steel grades — 4704 designations — Page 76
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 10 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| StE 315 | 1.0505 | Fine-grain structural steels | ≤ 0.18 | 1 |
| StE 320-3 Z | 1.0250 | Unalloyed structural steels | ≤ 0.2 | — |
| StE 320.7 | 1.0409 | Others | ≤ 0.22 | — |
| StE 320.7 TM | 1.0430 | Others | 0.04–0.12 | — |
| StE 350-3 Z | 1.0529 | Unalloyed structural steels | ≤ 0.2 | — |
| StE 355 | 1.0545 | Fine-grain structural steels | ≤ 0.2 | 9 |
| StE 355 | 1.0562 | Fine-grain structural steels | ≤ 0.18 | 18 |
| StE 355 N | 1.0539 | Fine-grain structural steels | ≤ 0.2 | 1 |
| StE 355 TM Withdrawn | 1.8821 | Others | ≤ 0.14 | — |
| StE 355 TM Withdrawn | 1.8823 | Others | ≤ 0.14 | 5 |
| StE 360.7 | 1.0582 | Others | ≤ 0.2 | 3 |
| StE 360.7 TM | 1.0578 | Others | ≤ 0.16 | 1 |
| StE 380 Withdrawn | 1.8900 | Fine-grain structural steels | ≤ 0.2 | 4 |
| StE 385.7 Withdrawn | 1.8970 | Others | ≤ 0.24 | — |
| StE 385.7 TM Withdrawn | 1.8971 | Others | ≤ 0.22 | — |
| StE 415.7 Withdrawn | 1.8972 | Others | ≤ 0.21 | 2 |
| StE 415.7 TM Withdrawn | 1.8973 | Others | ≤ 0.16 | 1 |
| StE 420 Withdrawn | 1.8902 | Fine-grain structural steels | ≤ 0.2 | 19 |
| StE 420 TM IndicativeWithdrawn | 1.8824 | Others | ≤ 0.16 | — |
| StE 420 TM IndicativeWithdrawn | 1.8825 | Others | ≤ 0.16 | 2 |
| StE 445.7 TM Withdrawn | 1.8975 | Others | ≤ 0.16 | 1 |
| StE 460 Withdrawn | 1.8901 | Fine-grain structural steels | ≤ 0.2 | 7 |
| StE 460 Withdrawn | 1.8905 | Fine-grain structural steels | ≤ 0.2 | 14 |
| StE 460 N Withdrawn | 1.8953 | Others | ≤ 0.22 | 1 |
| StE 460 TM IndicativeWithdrawn | 1.8826 | Others | ≤ 0.16 | — |
| StE 460 TM IndicativeWithdrawn | 1.8827 | Others | ≤ 0.16 | 5 |
| StE 480.7 TM Withdrawn | 1.8977 | Others | ≤ 0.16 | 1 |
| StE 500 Withdrawn | 1.8907 | Fine-grain structural steels | ≤ 0.21 | 1 |
| StE 500 V Withdrawn | 1.8924 | Others | ≤ 0.2 | 2 |
| StE 550 V Withdrawn | 1.8904 | Others | ≤ 0.2 | 1 |
| StE 550.7 TM Withdrawn | 1.8978 | Fine-grain structural steels | ≤ 0.16 | 2 |
| StE 620 V Withdrawn | 1.8914 | Others | ≤ 0.2 | 1 |
| StE 690 V Withdrawn | 1.8931 | High-strength steels | ≤ 0.2 | 3 |
| StE 690.7 TM Withdrawn | 1.8979 | Others | ≤ 0.1 | — |
| StE240.7TM Indicative | 1.0418 | Fine-grain structural steels | ≤ 0.16 | 1 |
| StE255 Indicative | 1.0345 | Heat-resistant structural steels | ≤ 0.16 | 18 |
| StE285TM Indicative | 1.8818 | Others | ≤ 0.13 | 1 |
| StE355 Indicative | 1.8823 | Others | ≤ 0.14 | 5 |
| StE445.7 Indicative | 1.8975 | Others | ≤ 0.16 | 1 |
| StE460 Indicative | 1.8827 | Others | ≤ 0.16 | 5 |
| StSch 1100 | 1.0915 | Others | 0.6–0.8 | — |
| StSch 1200 | 1.0631 | Others | 0.72–0.8 | 1 |
| StSch 550 | 1.0422 | Others | 0.2–0.4 | — |
| StSch 600 | 1.0544 | Others | 0.3–0.5 | — |
| StSch 700 | 1.0521 | Others | 0.4–0.6 | — |
| StSch 800 | 1.0524 | Others | 0.5–0.6 | — |
| StSch 900 A | 1.0623 | Others | 0.62–0.8 | — |
| StSch 900B | 1.0624 | Others | 0.55–0.75 | — |
| StSchStr | 1.0341 | Unalloyed structural steels | — | — |
| StSP 37 | 1.0021 | Unalloyed structural steels | ≤ 0.2 | 3 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.