DIN / EN steel grades — 4704 designations — Page 78
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 13 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| TStE 355 | 1.0566 | Fine-grain structural steels | ≤ 0.18 | 11 |
| TStE 355 N | 1.0549 | Others | ≤ 0.18 | 1 |
| TStE 355 TM Withdrawn | 1.8832 | Others | ≤ 0.14 | — |
| TStE 355 TM Withdrawn | 1.8834 | Fine-grain structural steels | ≤ 0.14 | 6 |
| TStE 380 Withdrawn | 1.8910 | Fine-grain structural steels | ≤ 0.2 | — |
| TStE 420 Withdrawn | 1.8912 | Fine-grain structural steels | ≤ 0.2 | 5 |
| TStE 420 TM IndicativeWithdrawn | 1.8835 | Others | ≤ 0.16 | — |
| TStE 420 TM IndicativeWithdrawn | 1.8836 | Fine-grain structural steels | ≤ 0.16 | 3 |
| TStE 460 Withdrawn | 1.8903 | Fine-grain structural steels | ≤ 0.2 | 4 |
| TStE 460 Withdrawn | 1.8915 | Fine-grain structural steels | ≤ 0.2 | 2 |
| TStE 460 N Withdrawn | 1.8956 | Others | ≤ 0.22 | — |
| TStE 460 TM IndicativeWithdrawn | 1.8837 | Others | ≤ 0.16 | 1 |
| TStE 460 TM IndicativeWithdrawn | 1.8838 | Others | ≤ 0.16 | 4 |
| TStE 460 V Withdrawn | 1.8906 | Others | ≤ 0.2 | 3 |
| TStE 500 Withdrawn | 1.8917 | Fine-grain structural steels | ≤ 0.21 | 1 |
| TStE 500 V Withdrawn | 1.8909 | Others | ≤ 0.2 | 3 |
| TStE 550 V Withdrawn | 1.8926 | Others | ≤ 0.2 | 2 |
| TStE 590 V Withdrawn | 1.8923 | Others | ≤ 0.2 | — |
| TStE 620 V Withdrawn | 1.8927 | Others | ≤ 0.2 | 2 |
| TStE 690 V Withdrawn | 1.8928 | High-strength steels | ≤ 0.2 | 7 |
| TStE 690 VA Withdrawn | 1.8920 | High-strength steels | 0.1–0.2 | — |
| TStE 690 VB Withdrawn | 1.8921 | High-strength steels | 0.12–0.21 | 1 |
| TStE 690 VC Withdrawn | 1.8922 | High-strength steels | 0.12–0.21 | — |
| TStE 690 VD Withdrawn | 1.8929 | Others | 0.14–0.2 | — |
| TStE 770 V Withdrawn | 1.8938 | Others | ≤ 0.2 | — |
| TStE 890 V Withdrawn | 1.8983 | High-strength steels | ≤ 0.2 | — |
| TStE 960 V Withdrawn | 1.8933 | High-strength steels | ≤ 0.2 | 1 |
| TStE275TM Indicative | 1.8819 | Others | ≤ 0.13 | 1 |
| TStE285TM Indicative | 1.8819 | Others | ≤ 0.13 | 1 |
| TStE355 Indicative | 1.8834 | Fine-grain structural steels | ≤ 0.14 | 6 |
| TStE460 Indicative | 1.8838 | Others | ≤ 0.16 | 4 |
| TStE460V Indicative | 1.8916 | Others | ≤ 0.2 | 1 |
| TStE460V Indicative | 1.8908 | Others | ≤ 0.2 | 3 |
| TTSt 35 | 1.0356 | Others | — | 2 |
| TTSt 35 Withdrawn | 1.1101 | Others | ≤ 0.17 | 1 |
| TTSt 35 N Indicative | 1.0356 | Others | — | 2 |
| TTSt 35 V Indicative | 1.0356 | Others | — | 2 |
| TTSt 41 | 1.0437 | Others | ≤ 0.2 | 8 |
| Type403 Indicative | 1.4000 | Stainless steels | ≤ 0.08 | 16 |
| U 10 S 10 | 1.0702 | Free cutting steels | ≤ 0.15 | 2 |
| U 10 S 6 | 1.0706 | Free cutting steels | ≤ 0.15 | — |
| U 7 S 10 | 1.0700 | Free cutting steels | ≤ 0.1 | — |
| U 7 S 6 | 1.0708 | Free cutting steels | ≤ 0.1 | — |
| UH I | 1.0348 | Others | ≤ 0.13 | — |
| UKSt 37-2 | 1.0124 | Unalloyed structural steels | ≤ 0.17 | — |
| UP-NiCr20Nb | 2.4806 | Others | ≤ 0.05 | 1 |
| UP-NiCr21Mo9Nb | 2.4831 | Others | ≤ 0.1 | 3 |
| UP-NiCu30MnTi | 2.4377 | Others | ≤ 0.15 | 1 |
| UP-NiMo16Cr16Ti | 2.4611 | Others | ≤ 0.015 | 1 |
| UP-NiMo27 | 2.4615 | Others | ≤ 0.02 | 1 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.