MSZ steel grades — 255 designations — Page 4
Every grade designated under MSZ, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is an indicative cross-reference, not an asserted identity: the grades are close, not interchangeable. Check the composition before you substitute.
Also known as
255 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| Fe355C/FF | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 20 |
| Fe490-2 | 1.0050 | Unalloyed structural steels | — | 23 |
| Fe490-2 | 1.0050 | Unalloyed structural steels | — | 23 |
| Fe590-2 | 1.0060 | Unalloyed structural steels | — | 21 |
| Fe590-2 | 1.0060 | Unalloyed structural steels | — | 21 |
| FK | 1.0044 | Unalloyed structural steels | ≤ 0.21 | 26 |
| GO3 | 1.3505 | Bearing steels | 0.93–1.05 | 22 |
| GO4 | 1.3520 | Bearing steels | 0.93–1.05 | 16 |
| GoV50 | EN-JS1082 | Others | — | 20 |
| GoV50 | EN-JS1083 | Others | — | 20 |
| GoV60 | EN-JS1060 | Others | — | 20 |
| GoV60 | EN-JS1092 | Others | — | 20 |
| GoV60 | EN-JS1093 | Others | — | 20 |
| GoV70 | EN-JS1102 | Others | — | 21 |
| GoV70 | EN-JS1103 | Others | — | 21 |
| H12 | 1.4724 | Heat resistant steels | ≤ 0.12 | 15 |
| H13 | 1.4742 | Heat resistant steels | ≤ 0.12 | 17 |
| H5Ti | 1.4541 | Stainless steels | ≤ 0.08 | 25 |
| H8 | 1.4828 | Heat resistant steels | ≤ 0.2 | 20 |
| H9 | 1.4845 | Heat resistant steels | ≤ 0.1 | 21 |
| K13 | 1.2344 | Tool steels for hot work | 0.35–0.42 | 20 |
| K13K | 1.2344 | Tool steels for hot work | 0.35–0.42 | 20 |
| K14 | 1.2365 | Tool steels for hot work | 0.28–0.35 | 18 |
| K4 | 1.2067 | Tool steels for cold work | 0.95–1.1 | 21 |
| K6 | 1.2008 | Tool steels for cold work | 1.35–1.5 | 9 |
| K8 | 1.2379 | Tool steels for cold work | 1.45–1.6 | 20 |
| KL 10 | 1.7715 | Heat-resistant structural steels | 0.1–0.18 | 8 |
| KL2 | 1.0425 | Heat-resistant structural steels | ≤ 0.2 | 20 |
| KL2 | 1.8945 | Weathering steels | ≤ 0.12 | 16 |
| KL2C | 1.0426 | Aging resistant steels | 0.08–0.2 | 17 |
| KL2C | 1.0425 | Heat-resistant structural steels | ≤ 0.2 | 20 |
| KL3 | 1.0436 | Fine-grain structural steels | 0.15–0.2 | 14 |
| KL9 | 1.7262 | Case hardening steels | 0.13–0.17 | 18 |
| KL9 | 1.7335 | Heat-resistant structural steels | 0.08–0.18 | 22 |
| KO2 | 1.4006 | Stainless steels | 0.08–0.15 | 26 |
| KO36Ti | 1.4541 | Stainless steels | ≤ 0.08 | 25 |
| KO37Ti | 1.4541 | Stainless steels | ≤ 0.08 | 25 |
| KO38LC | 1.4404 | Stainless steels | ≤ 0.03 | 25 |
| KO43ELC | 1.4361 | Stainless steels | ≤ 0.015 | 7 |
| MC | 1.0501 | Quenched and tempered steels | 0.32–0.39 | 23 |
| MCrMo | 1.7218 | Quenched and tempered steels | 0.22–0.29 | 25 |
| MCrMoV | 1.7709 | Heat-resistant structural steels | 0.17–0.25 | 6 |
| MCrMoV | 1.8070 | Heat-resistant structural steels | 0.17–0.25 | 4 |
| MCrMoV | 1.7733 | Heat-resistant structural steels | 0.2–0.28 | 15 |
| Mn 1 | 1.1170 | Quenched and tempered steels | 0.25–0.32 | 16 |
| NCMo 5 | 1.6582 | Quenched and tempered steels | 0.3–0.38 | 25 |
| NCMo 6 | 1.6580 | Quenched and tempered steels | 0.26–0.34 | 15 |
| NCMo4 | 1.6510 | Others | 0.35–0.43 | 7 |
| NK | 1.2711 | Tool steels for cold work | 0.5–0.6 | 16 |
| OV15 | EN-JL1020 | Others | — | 22 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.