UNE · 760 grades

UNE steel grades — 760 designations — Page 6

Every grade designated under UNE, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an indicative cross-reference, not an asserted identity — the grades are close, not interchangeable. 1 of 50 rows differ and carry a “This grade’s own name” mark.

Also known as

760 designations

Grade	Material no.	Category	C% by weight	Also inother standards
CrMo12	1.8515	Nitriding steels	0.28–0.35	8
CrV4	1.8159	Quenched and tempered steels	0.47–0.55	27
DC01	1.0322	Unalloyed structural steels	≤ 0.12	17
DC03	1.0338	Unalloyed structural steels	≤ 0.08	18
DC04	1.0338	Unalloyed structural steels	≤ 0.08	18
DD	1.0562	Fine-grain structural steels	≤ 0.18	18
DD11	1.0332	Unalloyed structural steels	≤ 0.12	16
DD13	1.0322	Unalloyed structural steels	≤ 0.12	17
E295	1.0050	Unalloyed structural steels	—	23
E295	1.0050	Unalloyed structural steels	—	23
E355	1.0060	Unalloyed structural steels	—	21
E355	1.0060	Unalloyed structural steels	—	21
EM2	1.3343	High-speed steels	0.86–0.94	19
EM35	1.3243	High-speed steels	0.87–0.95	19
ET1	1.3355	High-speed steels	0.73–0.83	22
F 1207 This grade’s own name	1.7039	Quenched and tempered steels	0.38–0.45	13
F-128	1.6510	Others	0.35–0.43	7
F-1312	1.3520	Bearing steels	0.93–1.05	16
F-1460	1.7701	Spring steels	0.48–0.56	3
F-150.E	1.5920	Case hardening steels	0.15–0.2	6
F-1516	1.7016	Case hardening steels	0.14–0.2	11
F-152	1.5639	Low-temperature structural steels	0.12–0.19	9
F-1523	1.1555	Unalloyed tool steels / carbon steels	1.15–1.25	16
F-1550	1.7243	Case hardening steels	0.15–0.21	12
F-1550	1.3566	Others	0.12–0.18	8
F-3310	1.2782	Tool steels for hot work	≤ 0.2	6
F-3401	1.4005	Stainless steels	0.08–0.15	14
F-3401	1.4024	Stainless steels	0.12–0.17	13
F-3507	1.4310	Stainless steels	0.05–0.15	18
F-3507	1.4305	Stainless steels	≤ 0.1	17
F-3507	1.4325	Stainless steels	0.03–0.15	11
F-513	1.1525	Unalloyed tool steels / carbon steels	0.75–0.85	20
F-513	1.1625	Unalloyed tool steels / carbon steels	0.75–0.85	15
F-5211	1.2379	Tool steels for cold work	1.45–1.6	20
F-5211	1.2880	Tool steels for cold work	1.55–1.75	8
F-5211	1.2880	Others	1.55–1.75	8
F. 3541	1.4311	Stainless steels	≤ 0.03	13
F.111	1.0401	Case hardening steels	0.12–0.18	23
F.1110	1.0401	Case hardening steels	0.12–0.18	23
F.112	1.0402	Quenched and tempered steels	0.17–0.24	24
F.1120	1.0402	Quenched and tempered steels	0.17–0.24	24
F.1120	1.0406	Quenched and tempered steels	0.22–0.29	20
F.1120	1.1151	Quenched and tempered steels	0.17–0.24	15
F.1120	1.1158	Quenched and tempered steels	0.22–0.29	12
F.1120-C 25 k	1.1158	Quenched and tempered steels	0.22–0.29	12
F.1120-C25k	1.1151	Quenched and tempered steels	0.17–0.24	15
F.113	1.0501	Quenched and tempered steels	0.32–0.39	23
F.1130	1.0501	Quenched and tempered steels	0.32–0.39	23
F.114	1.0503	Quenched and tempered steels	0.42–0.5	24
F.114	1.1730	Unalloyed tool steels / carbon steels	0.42–0.5	14

This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.