DIN / EN steel grades — 4704 designations — Page 5
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is recorded in our sources as this standard’s own designation for the grade.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 100CrMnSi4-4 | 1.3518 | Others | 0.93–1.05 | 1 |
| 100CrMnSi6-4 | 1.3520 | Bearing steels | 0.93–1.05 | 16 |
| 100CrMnSi6-6 | 1.3519 | Others | 0.93–1.05 | — |
| 100CrMo5 | 1.2303 | Tool steels for cold work | 0.9–1.1 | 4 |
| 100CrMo7 | 1.3537 | Others | 0.93–1.05 | 4 |
| 100CrMo7-3 | 1.3536 | Bearing steels | 0.93–1.05 | 2 |
| 100CrMo7-4 | 1.3538 | Others | 0.93–1.05 | 2 |
| 100MnCrW4 | 1.2510 | Tool steels for cold work | 0.9–1.05 | 13 |
| 100V1 | 1.2833 | Tool steels for cold work | 0.95–1.05 | 7 |
| 101Cr6 | 1.3514 | Tool steels for cold work | 0.95–1.1 | 2 |
| 102Cr6 | 1.2067 | Tool steels for cold work | 0.95–1.1 | 21 |
| 102CrMo6 | 1.2305 | Tool steels for cold work | 0.98–1.05 | — |
| 105Cr4 | 1.2057 | Tool steels for cold work | 1–1.1 | 4 |
| 105Cr4 Withdrawn | 1.3503 | Bearing steels | 1–1.1 | 2 |
| 105Cr5 Withdrawn | 1.2060 | Tool steels for cold work | 1–1.1 | 15 |
| 105MnCr4 | 1.2127 | Tool steels for cold work | 1–1.1 | 1 |
| 105V | 1.2834 | Tool steels for cold work | 1–1.1 | 5 |
| 105WCr6 | 1.2419 | Tool steels for cold work | 1–1.1 | 16 |
| 10CrMo11 | 1.7276 | Hydrogen resistant steels | 0.08–0.12 | 1 |
| 10CrMo5-5 | 1.7338 | Heat-resistant structural steels | ≤ 0.15 | 1 |
| 10CrMo9-10 | 1.7380 | Heat-resistant structural steels | 0.08–0.14 | 20 |
| 10CrMoBS5 | 1.7275 | Others | 0.08–0.12 | — |
| 10CrSiMoV7 | 1.8075 | Others | ≤ 0.12 | — |
| 10Mn4 | 1.1108 | Others | ≤ 0.14 | — |
| 10MnCrMoV5-5-5-2 | 1.7950 | Others | ≤ 0.12 | — |
| 10MnMo4-5 | 1.5424 | Heat-resistant structural steels | 0.08–0.12 | — |
| 10MnMoCrV4-7 | 1.5407 | Heat-resistant structural steels | 0.06–0.15 | — |
| 10MnSi5 | 1.5112 | Others | 0.07–0.11 | — |
| 10MnSi5-4 | 1.5128 | Others | 0.06–0.15 | — |
| 10MnSi7 | 1.5130 | Others | 0.08–0.13 | — |
| 10MnTi3 | 1.8882 | Others | ≤ 0.12 | — |
| 10Ni14 Withdrawn | 1.5637 | Low-temperature structural steels | ≤ 0.15 | 11 |
| 10NiCr5-4 | 1.5805 | Case hardening steels | 0.07–0.12 | 1 |
| 10NiMnMo6-5 | 1.6312 | Others | 0.08–0.12 | 1 |
| 10NiMnMoCr6-6 | 1.6313 | Others | 0.07–0.13 | — |
| 11 SMn 30 | 1.0715 | Free cutting steels | ≤ 0.14 | 14 |
| 11 SMn 37 | 1.0736 | Free cutting steels | ≤ 0.14 | 11 |
| 11 SMnPb 30 | 1.0718 | Free cutting steels | ≤ 0.14 | 11 |
| 11 SMnPb 37 | 1.0737 | Free cutting steels | ≤ 0.14 | 8 |
| 11 SMnPbBiTe 30 | 1.0720 | Free cutting steels | ≤ 0.14 | — |
| 11 SMnPbBiTe 37 | 1.0739 | Free cutting steels | ≤ 0.14 | — |
| 11 SMnPbTe 30 | 1.0719 | Free cutting steels | ≤ 0.14 | — |
| 11 SMnPbTe 37 | 1.0738 | Free cutting steels | ≤ 0.14 | — |
| 110 WCrV 8 Withdrawn | 1.2521 | Others | 1.05–1.15 | — |
| 110MnCrTi8 | 1.8425 | Others | 1–1.2 | — |
| 110WCrV5 | 1.2519 | Tool steels for cold work | 1.05–1.15 | 2 |
| 115CrV3 | 1.2210 | Tool steels for cold work | 1.1–1.25 | 13 |
| 115W8 | 1.2442 | Tool steels for cold work | 1.1–1.2 | — |
| 11CrMo4-5 | 1.7346 | Others | 0.11–0.15 | — |
| 11CrMo5-5 | 1.7339 | Others | 0.09–0.14 | 1 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.