DIN / EN steel grades — 4704 designations — Page 62
Every grade designated under DIN / EN, with the identifying and comparative data we hold for each. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 1 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight |
|---|---|---|---|
| P690Q | 1.8879 | Others | ≤ 0.2 |
| P690QH | 1.8880 | Others | ≤ 0.2 |
| P690QL1 | 1.8881 | Others | ≤ 0.2 |
| P690QL2 | 1.8888 | Others | ≤ 0.2 |
| PMHS11-2-5-8 | 1.3253 | High-speed steels | 1.55–1.65 |
| PMHS12-0-5-5 | 1.3251 | High-speed steels | 1.5–1.6 |
| PMHS2-2-2 | 1.3397 | High-speed steels | 0.55–0.65 |
| PMHS3-3-1-8 | 1.3288 | High-speed steels | 0.75–0.85 |
| PMHS3-3-4 | 1.3377 | High-speed steels | 1.45–1.55 |
| PMHS4-3-8 | 1.3352 | High-speed steels | 2.42–2.48 |
| PMHS6-5-3 | 1.3394 | High-speed steels | 1.15–1.25 |
| PMHS6-5-3-8 | 1.3294 | High-speed steels | 1.23–1.33 |
| PMHS6-5-3C | 1.3395 | High-speed steels | 1.25–1.32 |
| PMHS6-5-4 | 1.3361 | High-speed steels | 1.25–1.4 |
| PMHS7-7-7-11 | 1.3292 | High-speed steels | 2.2–2.4 |
| PMX220CrVMo13-4 | 1.2380 | Others | 2.1–2.3 |
| PSt 37-3 | 1.0176 | Unalloyed structural steels | ≤ 0.17 |
| PSt 44-2 | 1.0146 | Unalloyed structural steels | ≤ 0.21 |
| PSt 44-3 | 1.0135 | Unalloyed structural steels | ≤ 0.2 |
| PSt 50-2 | 1.0538 | Others | — |
| PSt 52-3 | 1.0572 | Others | ≤ 0.22 |
| QSt 32-3 Withdrawn | 1.0303 | Unalloyed structural steels | 0.02–0.06 |
| QSt 34-3 Withdrawn | 1.0213 | Unalloyed structural steels | 0.06–0.1 |
| QSt 36-3 Withdrawn | 1.0214 | Unalloyed structural steels | 0.08–0.12 |
| QSt 37-3 | 1.0118 | Unalloyed structural steels | ≤ 0.17 |
| QSt 37-3 | 1.0123 | Unalloyed structural steels | ≤ 0.17 |
| QSt 38-3 | 1.0234 | Unalloyed structural steels | 0.13–0.17 |
| QSt 44-2 | 1.0128 | Unalloyed structural steels | ≤ 0.21 |
| QSt 44-3 | 1.0133 | Unalloyed structural steels | ≤ 0.21 |
| QSt 52-3 | 1.0569 | Unalloyed structural steels | ≤ 0.2 |
| QSt 52-3 | 1.0573 | Others | ≤ 0.22 |
| QSt 52-3 Cu3 Withdrawn | 1.0587 | Others | ≤ 0.2 |
| QSt36-3 Indicative | — | — | 0.08–0.13 |
| QStE 260 N Withdrawn | 1.0971 | Fine-grain steels for cold forming | ≤ 0.16 |
| QStE 260 TM Withdrawn | 1.0970 | Fine-grain steels for cold forming | ≤ 0.12 |
| QStE 300 N Withdrawn | 1.0973 | Fine-grain steels for cold forming | ≤ 0.16 |
| QStE 300 TM Withdrawn | 1.0972 | Fine-grain steels for cold forming | ≤ 0.12 |
| QStE 340 N Withdrawn | 1.0975 | Fine-grain steels for cold forming | ≤ 0.16 |
| QStE 340 TM Withdrawn | 1.0974 | Fine-grain steels for cold forming | ≤ 0.12 |
| QStE 360 N Withdrawn | 1.0977 | Fine-grain steels for cold forming | ≤ 0.18 |
| QStE 360 TM Withdrawn | 1.0976 | Fine-grain steels for cold forming | ≤ 0.12 |
| QStE 380 N Withdrawn | 1.0979 | Fine-grain steels for cold forming | ≤ 0.18 |
| QStE 380 TM Withdrawn | 1.0978 | Fine-grain steels for cold forming | ≤ 0.12 |
| QStE 420 N Withdrawn | 1.0981 | Fine-grain steels for cold forming | ≤ 0.2 |
| QStE 420 TM Withdrawn | 1.0980 | Fine-grain steels for cold forming | ≤ 0.12 |
| QStE 460 N Withdrawn | 1.0983 | Fine-grain steels for cold forming | ≤ 0.21 |
| QStE 460 TM Withdrawn | 1.0982 | Fine-grain steels for cold forming | ≤ 0.12 |
| QStE 500 N Withdrawn | 1.0985 | Fine-grain steels for cold forming | ≤ 0.22 |
| QStE 500 TM Withdrawn | 1.0984 | Fine-grain steels for cold forming | ≤ 0.12 |
| QStE 550 N Withdrawn | 1.0987 | Fine-grain steels for cold forming | ≤ 0.24 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.